Loading ...
Loading ...
Loading ...
12
XBU55 STEP FOUR
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
58 PHILLIPS HEAD SCREW
M5 X 12MM
6
1. Gather HARDWARE FOR STEP 4.
2. Insert the COMPUTER CABLE (29) and 2
HAND PULSE CABLES (26, 28) into the
connectors in the back of the CONSOLE
(34). Install the CONSOLE (34) onto
the CONSOLE MAST (2). Install the 4
PHILLIPS HEAD SCREWS (58) with the
PHILLIPS HEAD SCREW DRIVER (93).
3. Install the PEDALS (45L, 46R) onto the
CRANK ARMS (16L, 16R). Remember
that the LEFT PEDAL has a reverse thread
and will be screwed into the crank in the
OPPOSITE ROTATION from normal
threads. There is an “L” stamped into the end of
the threaded post of the left pedal and an “R”
in the right. Make sure to tighten the pedals as
much as you possibly can. It may be necessary
to re-tighten the pedals if you feel a thumping
while pedaling the bike. A noise or feeling such
as a thumping or clicking is usually caused by
the pedals being too loose. Tighten using the
WRENCH (92).
Continued on next page...
Loading ...
Loading ...
Loading ...