Loading ...
Loading ...
Loading ...
9
XBU55 STEP ONE
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION QTY
50 BOLT
3/8” X 2”
2
71 FLASH WASHER
Ø3/8” × Ø25 × 2T
2
135 NUT
3/8” × UNC16 × 12.5T
2
1. Gather HARDWARE FOR STEP 1.
2. Install the REAR STABILIZER (5) onto the MAIN
FRAME (1) with the 2 BOLTS (50) and 2 FLAT
WASHERS (71) and 2 NUTS (135). Tighten using
the WRENCH (100).
3. Insert an END CAP (41) into each opening of the
FRONT STABILIZER TUBE. You may need to tap
them in with a rubber mallet if they are tight.
Loading ...
Loading ...
Loading ...