Loading ...
Loading ...
Loading ...
10
XBU55 STEP TWO
HARDWARE FOR STEP 2
PART TYPE DESCRIPTION QTY
51 BOLT
5/16”XUNC18X5/8”
7
72 FLAT WASHER
Ø5/16” × Ø18 × 1.5T
6
99 CURVED WASHER
Ø5/16” × 19 × 1.5T
1
1. Gather HARDWARE FOR STEP 2.
2. Unravel the COMPUTER CABLE (29)
and snake it through the CONSOLE MAST
COVER (38) and the CONSOLE MAST (2)
until the cable connector comes out the top
opening of the console mast. BE SURE NOT
TO PINCH THE CABLE OR DAMAGE
TO THE ELECTRONICS MAY OCCUR.
Slide the PLASTIC COVER (38) onto the
console mast, ensuring the correct orientation
of the cover.
3. Install the CONSOLE MAST (2) onto the
MAIN FRAME (1) with 7 BOLTS (51), 6
FLAT WASHERS (72) on the side bolts and
1 CURVED WASHER (99) on the front bolt.
Tighten using the WRENCH (100).
Loading ...
Loading ...
Loading ...