Loading ...
Loading ...
Loading ...
11
XBU55 STEP THREE
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
51 BOLT
5/16” X UNC18 X 5/8”
2
72 FLAT WASHER
Ø5/16” × Ø18 × 1.5T
2
103 SPLIT WASHER
5/16” X 1.5T
2
1. Gather HARDWARE FOR STEP 3.
2. Run the 2 HAND PULSE WIRES (26) into
the hole in the handle bar mounting plate
and out through the hole in the console plate.
Remove the black plastic cover from the
handlebars by cutting the plastic tie.
3. Install the HANDLE BAR (3) onto the
CONSOLE MAST (2) with 2 BOLTS (51),
2 FLAT WASHERS (72), and 2 SPLIT
WASHERS (103), being careful not to
pinch the hand pulse wires. Tighten using
the WRENCH (100). Snap the black plastic
handlebar cover over the joint.
Loading ...
Loading ...
Loading ...