Loading ...
Loading ...
Loading ...
Specifications
AMPLIFIER SECTION
Continuous Average Power output (FTC)
All channels: 100 watts per channel mira RMS at
8 ohms, 2 channels driven from 20
Hz to 20 kHz with no more than
0.08% total harmonic distortion.
130 watts min. RMS at 6 ohms, 2
channels driven from 1 kHz with
no more than 0.1% total harmonic
Continuous Power output (DIN)
Maximum Power output (E1AJ)
Dynamic Power Output (Stereo)
Total Harmonic Distortion:
1M Distortion:
Damping Factor:
Input Sensitivity and Impedance
PHONO:
LINE (CD, TAPE, DVD,
VIDEO 1-5):
MULT1CHANNEL INPUT
(FRONT L/C/R, SURROUND
L/R, SURROUND BACK L/R):
(SUBWOOFER):
COAXIAL 1,2, 3 (DIGITAL):
DVD, VIDEO 1,2, 3, 4, 5:
COMPONENT VIDEO 1, 2:
Output Level and Impedance
Rec out (TAPE, VIDEO 1,2):
TUNER SECTION
FM
Tuning Range:
Usable Sensitivity
Mono:
Stereo:
50 dB Quieting Sensitivity
distortion.
135 watts at 6 ohms
160 watts at 6 ohms
2 x 250 watts at 3 ohms
2 × 210 watts at 4 ohms
2× 130 watts at 8 ohms
0.08% at ra_ed power
0.08% at 1 Watt output
0.08% at rated power
0.08% at 1 Watt output
60 at 8 ohms
2.5 mV, 50 kohms
200 mV, 50 kohms
200 mV, 50 kohms
36 mY, 50 kohms
0.5 Vp-p, 75 ohms
1 Vp-p, 75 ohms
1 Vp-p, 75 ohms (Y)
0.28 Vp-p, 75 ohms (C)
1 Vp-p, 75 ohms (Y)
0.7 Vp-p, 75 ohms (PB, PR)
200 mV, 470 ohms
Pre out: 1 V, 470 ohms
ZONE 2 OUT: 100mV, 470 ohms
VIDEO (VIDEO 1, 2, MONITOR
OUT, ZONE 2 OUT): I Vp-p, 75 ohms
1 Vp-p, 75 ohms (Y)
0.28 p-p, 75 ohms (C)
COMPONENT VIDEO OUT: 1 Vp-p, 75 ohms (Y)
0.7 Vp-p, 75 ohms (PB, PR)
Mono:
Stereo:
Captm-e Ratio:
Image Rejection Ratio
USA & Canadian models:
Other area models:
IF Rejection Ratio:
Signal-to-Noise Ratio
Mono:
Stereo:
Alternate Channel Attenuation:
Selectivity:
AM Suppression Ratio:
Total Harnmnic Distortion
Mono:
Stereo:
Frequency Response:
Stereo Separation:
AM
Tuning Range
USA & Canadian models:
European & Australian models:
Worldwide models:
Usable Sensitivity:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Total Harnmnic Distortion:
GENERAL
Power Supply
USA & Canadian models:
European & Australian models:
Some Asian nmdels:
Phono Overload:
Frequency Response:
R1AA Deviation:
Tone Control
Bass:
Treble:
Signal-m-Noise Ratio (Stereo)
Phono:
CD/Tape:
120 mV RMS at 1 kHz, 0.5% T.H.D.
I0 Hz to 100 kHz : +1/-3 dB
(CD in Direct mode)
20 Hz to 20 kHz : ±0.8 dB
±10dB at 50 Hz
±10 dB at 20,0!)0 Hz
80 dB (IHF A, 5 mV input)
110 dB (IHF A, 0.5 V input)
Worldwide models:
Power Consumption
USA & Canadian models:
Other models:
Dimensions (W × H x D):
87.5 -- 108.0 MHz (50 kHz steps)
I 1.2 dBL 1.0 pV (75 ohms IHF)
0.9 pV (75 ohms DIN)
17.2 dBf, 2.0 BV (75 ohms IHF)
23 gV (75 ohms DIN)
17.2 dBL 2.0 gV (75 ohms)
37.2 dBL 20 gV (75 ohms)
2.0 dB
40 dB
85 dB
90 dB
76 dB
70 dB
55 dB
50 dB (DIN)
50 dB
0.2%
0.3%
30 Hz ---- 15 kHz, ±1.0 dB
45dBatlkHz
30dB at 100Hz -- 10 kHz
530 to 1,7 I0 kHz (10-kHz steps)
522 to 1,611 kHz (9-kHz steps)
531 to 1,602 kHz (9-kHz steps)
530 m 1,7 I0 kHz ( 10-kHz steps)
3o_v"
40 dB
40 dB
40 dB
0.7%
AC 120 V, 00 Hz
AC 230-240 V, 50 Hz
AC 220-230 V, 50/60 Hz
AC 220-230 and 120 V switchable,
50/60 Hz
6.8A
550W
435 x 175 x 459mm
17-1/8"x 6-7/8"x 18-1/16"
Weight
USA & Canadian models: 35.9 Ibs.
Other models: 17.3 kg
REMOTE CONTROLLER
Transmitter: Infrared
Signal range: Approx. 16 fl, 5 meters
Power supply: Two "AA" batteries (1.5 V x 2)
Specifications and l_atures are subject to change without notice.
71
Loading ...
Loading ...
Loading ...