Loading ...
Loading ...
Loading ...
Connections
S VideO input ._
Video input
Analog audio
input
I
R (red)
6,VCR (VIDEO 1)
Analog audio _
output L (white)
Video output
IIIIIII t
S Video output
R(red) l
Analog audio
L (whde) output
With the initial settings of the TX-DS797, the DVD input source
is set for digital input at the COAX 1 jack.
If the digital connection is made at a different jack, this must be
changed at the Setup menu: Input Setup --_ Digital Setup (see page
33).
5. Connecting a DVD recorder or other digital video
recording device (VIDEO 2)
Using an RCA-type video connection cable, connect the video
oulput terminal (composite) on the device to the VIDEO 2 IN jacks
on the TX-DS797 and video input terminal to the VIDEO 2 OUT
jacks. If there is an S video input/output terminal on the device,
connect it to the S VIDEO 2 IN!OUT jack using an S video cable.
You do not need to connect to both the S VIDEO 2 IN and VIDEO 2
IN terminals. If the device has component video outputs, connect
them to one of the COMPONENT VIDEO INPUT jacks.
With the initial settings of the TX-DS797, the VIDEO 2 input
source is set for the COMPONENT VIDEO INPUT 2 jack.
If the video connection is made at COMPONENT VIDEO INPUT 1,
this must be changed at the Setup menu: Input Setup --_ Video Setup
--_ Component Video (see page 35).
Using an RCA-type audio connection cable, connect the audio
oulput terminal on the device to the same VIDEO 2 IN audio jacks
on the TX-DS797 and audio input terminal to the VIDEO 2 OUT
audio jacks. Make sure that you properly connect the left channel to
the L jack and the right channel 1o the R jack.
If the device has a digital oulput jack as well, be sure to also connect
it to either a DIGITAL INPUT (COAX) or DIGITAL INPUT (OPT)
jack on the TX-DS797 depending on the type of connector on the
device.
With the initial settings of the TX-DS797, the VIDEO 2 input
source is set for digital input at the COAXIAL 3 jack.
If the digital connection is made ata different jack, this must be changed
at the Setup menu: InputSetup --_ Digital Setup (see page 33).
If the device also has a digital input jack, it can be connected to the
DIGITAL OUTPUT (OPT) jack on the TX-DS797 for digital
recording of the source for REC OUT at the TX-DS797.
Note:
The output from the DIGITAL OUTPUT jack of the TX=DS797 is
only the digital signal input to the DIGITAL INPUT jack.
6. Connecting a video cassette recorder (VIDEO 1)
Using an RCA=type video connection cable, connect the video
output terminal (composite) on the video cassette recorder to the
VIDEO 1 IN jacks on the TX-DS797 and video input terminal m the
VIDEO 1 OUT jacks. If there is an S video inpul/output terminal on
the video cassette recorder, connect it to the S VIDEO 1 IN/OUT
jack using an S video cable. You do not need to connect m both 1be
S VIDEO 1 IN and VIDEO 1 IN terminals. If the video casselte
recorder has component video oulputs, connect them to one of the
COMPONENT VIDEO INPUT jacks.
With tile initial settings of the TX-DS797, the VIDEO 1 input
source is set for the COMPONENT VIDEO INPUT 2 jack.
If the video connection is made at COMPONENT VIDEO INPUT 1,
this must be changed at the Setup menu: Input Setup --_ Video Setup
--_ Component Video (see page 35).
Using an RCA=type audio connection cable, connect the audio
oulput lerminal on the video cassette recorder to the same VIDEO 1
IN audio jacks on the TX=DS797 and audio input terminal to the
VIDEO 1 OUT audio jacks. Make sure that you properly connect the
left channel to the L jack and the right channel to the R jack.
With tile initial settings of the TX-DS797, the VIDEO 1 input
source is set for digital input at the COAX 2 jack.
If the digital connection is made at a different jack, this must be
changed at the Setup menu: Input Setup --_ Digital Setup (see page
33).
17
Loading ...
Loading ...
Loading ...