Loading ...
Loading ...
Loading ...
Remote controller
@ AUDIO/TV/VCR button
AUDIO/A: For selecting the audio input signal. The setting changes
from "Auto" to "Multich" to "Analog" and back each time this
button is pressed. [531
TV/VCR: Must be preprograinmed for use in the TV and VCR
modes. [631
(_ LEVEL T/ANGLE and LEVEL A/SUBTITLE buttons
LEYEL •/A: Select the speaker whose volume is lo be adjusled
using Ihe CH SEL button and adjust the volume using the LEVEL A/
• buttons in the RCVR inode. [521
ANGLE: When in the DVD mode, for selecting a camera angle
when a DVD-Video is recorded with multiple angle playback. [581
SUBTITLE: When in the DVD mode, for selecting one of the
subtitle languages recorded on a DVD-Video. [58]
(_ CD/TAPE/DVD/MD operation buttons [56-59]
For operating other ONKYO components connected to the TX-
DS797 through the r.l I lerminals.
INPUT SELECTOR buttons [50]
Selects an input source.
Same as the input selecior buttons on front panel of the TX-DS797.
The input source for each buttons is given here. DVD:DVD, CD:CD,
VI:VIDEOI, V2:VIDEO2, V3:VIDEO3, V4:VIDEO4,
V5:VIDEO5, TAP:TAPE, TUN:FM/AM, PH:PHONO.
Numeric key/Listening mode SP A, B/
Re-EQ/DISPLAY/DIMMER buttons
1 to 9, +10, --/---, 0: For entering the number of a track. [57-63[
STEREO, DIRECT, DSP <1, SURR, THX: You can select a
listening mode. 151]
SP A, SP B: Not used with the TX-DS797.
Re-EQ: Depending on the listening mode, you can turn the cinema
re-equalizalion function on or oft'. 140, 43]
DISPLAY: For changing the display in the front display. [521
DIMMER: Adjusts the display brightness.
There are three settings available: normal, dark and very dark. [521
LIGHT button
For illuminaling the buttons of the remote controller.
This button is useful when using the remote controller in dark
locations. When pressed, the buttons on the remote controller light
green.
The button for the mode currently selecled lights brighter than the
rest.
MODE MACRO button [67]
For executing and programming the Macro function.
SETUP button [27]
For displaying and quitting the Setup menu.
(_) A/T/,</I_, ENTER button [27]
When selecting ilems in the Setup menu, press the upper and lower
portions to select an ilem, press the right and lefi portions to select
pm'ameter values or modes, and press ENTER Io select the item.
(_ VOL _ button [50, 53]
For adjusting the volume.
(_ TEST/MENU button
TEST: Outputs a test tone for setting speaker levels.
Use this butlon in conjunction with the LEVEL i/• and CH SEL
buttons to calibrate the speakers levels without entering the Setup
menu. When TEST button is pressed, the lest noise (pink noise) is
output. Use the LEVEL A/• buttons lo increase or decrease the
sound level. Use the CH SEL bution lo change from speaker to
speaker. For a more detailed explanation of how to calibrate the
speaker levels, see page 31.
MENU: When in the DVD mode, this button displays the DVD
menu. [581
MUTING button [50]
Activates the mute function.
(_ ZONE 2/SEARCH/ENTER button
ZONE 2: When in the RCVR mode, press this button to perform
operations on the remote zone (Zone 2). [54]
SEARCH: When in the DVD mode, for finding the specific section
on a disc where you want to start playback. [58]
ENTER: When in the MD mode, for confirming the selection. [59]
11
Loading ...
Loading ...
Loading ...