Loading ...
Loading ...
Loading ...
Speaker Setup
1. Speaker Setup menu
After you have installed the TX-DS797, connected all the
components, and determined the speaker layout, it is now time to
perform the settings in the Speaker Setup menu for the optimmn
sound acoustics for your environment and speaker layout.
Before you perform the following settings, it is important that you
first determine the following characteristics:
• The types and sizes of the speakers 1hat are connecled.
• The distance from each speaker to your normal listening
position.
(Only one surround back
speaker)
=Advanced Menu
l.Speaker Setup
l.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Bass Peak Level
_[_IENTERIQuit:ISETUPI
Li. 5Peaked. 5e%t,P
Memo:
(Only one surround back
speaker)
Monitor I
I1-1. Speaker Config sub-menu Q
Here you will enter which speakers are connected anti the size of
each speaker.
=Advanced Menu
l.Speaker Setup
l--l.Speaker Config
a. Subwoofer :Yes
b. Front :Small
c. Center :Small
d. Surr L/R :Small
e. Surr Back :Small
f.Surr Back Out :Ich
_[_ Quit:[SETUP I
[_[ lmm
(Two surround back speakers)
=Basic Menu
l.Speaker Setup
l.Speaker Config
2.Speaker Distance
3.Level Calibration
_[_IENTERIQuit:ISETUPI
11-SPeaker" 5e%t,P
(Two surround back speakers)
Tip:
When setting the speaker size in the Speaker Config sub-menu, use
the guidelines given below.
Large: The complete frequency range for the channel you are
setting will be oulput from the speaker.
Smalh Frequencies of the channel you are setting lower than 80
Hz will be output from the subwoofer. If there is no subwoofer,
then the oulput will be from 1he left and right front speakers. (Set
all speakers for THX speaker systems to "small?')
a. Subwoofer
Yes: Select when a subwoofer is connecled.
No: Select when a subwoofer is not connected.
b. Front
Large: Select if the front speakers are large sized.
Small: Select if the front speakers are small sized.
• If"No" is selected for the Subwoofer setting, 1hen this setting
is fixed to "Large."
c. Center
None: Select if no center speaker is connected.
Large: Select if the center speaker is large sized.
Small: Select if the cenler speaker is small sized.
• If "Small" is selected for the Front setting, then "Large"
cannot be selecled for this setting.
d. Surround L/R
None: Select if no surround left and right speakers are
connected.
Large: Select if lhe sun_und left and right speakers are lane sized.
Snmlh Select if lhe sun_und left and right speakers are small sized.
• If "Small" is selected for the Front setting, then "Large"
cannot be selecled for this setting.
e. Surround Bk
None: Select if no surround back left and right speakers are connected.
Large: Selecl if the surround back left and righl speakers are large sized.
Small: Select if the surround back lefl and right speakers are
small sized.
• If"None" is selected for the Surround L/R setting, the display
disappears from the screen.
• If "Small" is selected for the Surround L/R setting, then
"Large" cannot be selected for this setting.
f. Surf Back Out
lch: Select if Ihere is only one surround back speaker.
2oh (PREOUT only): Select if there are two surround back
speakers. (For preout output only.)
29
Loading ...
Loading ...
Loading ...