Jenn-Air JER8885RCW1 30" electric freestanding range

User Manual - Page 15

For JER8885RCW1.

PDF File Manual, 100 pages, Read Online | Download pdf file

JER8885RCW1 photo
Loading ...
Loading ...
Loading ...
Activating and canceling the clocidday
of week display: ..........................
1. PressSetup pad. "_Setup
On/Offj
2. Select CLOCK. ".................................
3. Pressthe arrow to scroll until DISABLE is displayed.
4. Select DISABLE.
5. Select TIME.
6. Select OFF to turn the clock display off, or select ON to turn
the clock display on.
7. Select OFF to turn the day of the week display off. Select
ON to turn the weekday display on.
8. To exit the Setup mode, press Setup pad.
Entering the day of the week:
Setup pad.
1. Press
2. Select CLOCK. On / Off /
3. Pressthe arrow to scroll until DAY is displayed.
4. Use Quickset arrow to scroll through the days.
5. Select day desired.
6. To exit the Setup mode, press Setup pad.
To set the clock for a 12 or 24 hour format:
The clock can be set to display time in either a 12 hour or 24
hour format.
1. Pressthe Setup pad.
2. Select CLOCK.
3. Use the arrow to scroll to the next screen.
4. Select 12/24 HOUR.
5. Select 12 HR or 24 HR.
6. To exit Setup mode, press Setup pad.
On / Off/i
Timers
Setting the Timers (Timer 1 or Timer 2):
1.
2.
PressTIMER 1 or TIMER 2 pad.
Press one of the displayed times using the
Quickset pads, or press the number pads to
enter the desired time.
TIMER 1 _i
On / Off /
Important: Each press of the displayed time choices
adds additional time. For example, pressing "10
MIN" three times provides 30 minutes on the timer
(0:30).
3. Press Enter pad.
Changing the amount of time entered once the
Timer starts:
1. Pressthe TIMER 1 or TIMER 2 pad once. TIMER 1
2. Pressthe displayed times on the Quickset , On / Off /
pads repeatedly until the desired time is entered.
OR
.
4. Press Enter pad.
Canceling the Timer:
1. Press the TIMER 1 or TIMER 2 pad twice.
if both Timers are active:
Press the number pads to enter the new desired time.
",_On / Off ,/
If the desired Timer is already in the foreground, press once
for edit mode and twice to cancel the Timer. If the desired
Timer is not in the foreground, follow the steps below.
1. Press the desired TIMER pad once. The selected Timer will
come to the foreground.
2. Press the TIMER pad a secondtime to access the edit
mode in order to make changes.
3. Pressing the TIMER pad a thirdtime will cancel the Timer.
Changing the Timer beeps:
The signal beeps for TIMER I and TIMER 2 can be changed.
The options available are two beeps every thirty seconds, two
beeps every sixty seconds or one beep only. The default
setting is one beep.
1. Press the Setup pad. i/ Setup 'i
2. Select the arrow to scroll until TONES
is displayed.
3. Select TONES.
4. Select TIMERS TONES.
5. Select the desired timer beep format (2-30 SEC, 2-60 SEC
or 1 BEEP).
6. Press Setup pad to exit Setup mode.
Locking the Control and Oven Door
The oven control and oven door can be locked to prevent
accidental programming. If an oven function is currently
being used, the control and door cannot be locked.
To lock the control and door:
Pressthe Back and Enter pads at the same time, holding for
three seconds or until CONTROL LOCKED appears in the
display.
To unlock the control and door:
Pressthe Back and Enter pads at the same time, holding for
three seconds. UNLOCKING DOORwill appear in the display
when the control and door are unlocking.
Back 0 Enter
l Space J
-_ lock
14
Loading ...
Loading ...
Loading ...