Loading ...
Loading ...
Loading ...
SURFACECO KING
Surface Controls
Use to turn on the surface elements. An infinite choice of
heat settings is available from Low to High. The knobs can
be set on or between any of the settings.
Setting the Controls
1. Place pan on surface element.
2.
.
Push in and turn the knob in either direction to the desired
heat setting.
* The control panel is marked to identify which
element the knob controls. For example, the
graphic at right indicates right front element. Fro
There is an element indicator light on the control panel.
When any surface control knob is turned on, the light will
turn on. The light will turn off when all the surface
elements are turned off.
4.
When a control is turned on, a glow can be seen through
the smoothtop surface. The element will cycle on and off
to maintain the preset heat setting, even on High.
After cooking, turn knob to OFF. Remove pan.
Suggested Heat Settings
The size and type of cookware, type
and amount of food and BTU of the
burner will determine where to set
the knob for cooking operations. Use
the settings printed around the
knobs as a guide.The following
descriptions will aid in choosing the
type setting that will give optimum
results:
Off
Low High
3
5
Hold or Warm: Food maintains a temperature above 140° F
without continuing to cook. Food is heated on a higher setting
until it reaches this temperature. Never use a hold or warm
setting to reheat cold food. Be sure knob is adjusted to
produce a consistant temperature. (Use the Low setting to
keep food warm.:)
Simmer: Food forms bubbles that barely break the surface.
Foods are between 185° F and 200 ° F.A simmer setting can
also be used to steam or poach foods or continue cooking
covered foods. (Adjust the knob between High and Low to
obtain the desired simmer action.:)
Slow Boil: Foodforms bubbles at a moderate pace. A slow
boil setting can also be used for most frying and for
maintaining the cooking of large amounts of liquids. (Adjust
the knob between High and Low to obtain the desired boil
action.:)
Boil: Liquid forms bubbles at a rapid pace. A fast boil setting
can be used to bring liquid to a boil, brown meat, stir fry,
saute, and heat oil for frying before turning to a lower setting.
The High setting is always used to bring liquids to a boil.
Once the liquid boils, always turn the control to the lowest
setting that will maintain the boil action.
Dual Element
The cooking surface is equipped
with a dual element located in the
left front position. To operate, push
in on the control knob and turn to
the leftto control the small element,
or push to the right to control the
large element.
Off
Low o _High
Low
10
Loading ...
Loading ...
Loading ...