Loading ...
Loading ...
Loading ...
11
XBR 95 STEP THREE
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
71 BOLT
3/8” X 1-3/4”
4
77 FLAT WASHER
Ø3/8” X Ø19 X 1.5T
4
89 NYLOC NUT
3/8”X7T
4
98 PHILLIPS HEAD SCREW
M6X15MM
4
1. Gather HARDWARE FOR STEP 3.
2. Install the SEAT (61) on the SEAT
CARRIAGE (4) with 4 PHILLIPS HEAD
SCREWS (98). Tighten with the PHILLIPS
HEAD SCREW DRIVER (114).
3. Attach the SEAT HANDLE BAR (6) to
the SEAT CARRIAGE (4) with the 4 Hex
Head Bolts (71), 4 FLAT WASHERS (77),
and 4 Nyloc Nuts (89). Tighten with the
WRENCHES provided (112 & 130).
4. Plug the HAND PULSE SENSOR CABLES
(27) into the rear two holes on the left side of
the rear plastic cover. Plug the HANDLEBAR
RESISTANCE CABLES (150) into the
remaining front hole.
Loading ...
Loading ...
Loading ...