Loading ...
Loading ...
Loading ...
iMPORTANT SAFETY iNSTRUCTiONS
READ AND SAVE THESE INSTRUCTIONS
DO NOT use pots or pans on the grill plate accessory.
DO NOT use the grill plate accessory for cooking
excessively fatty meats or products which promote flare-
ups.
The optional cutting board accessory must be removed
before operating the griddle beneath it or burners adjacent
to it.
GREASE IS FLAMMABLE. Let hot grease cool before
attempting to handle it. Avoid letting grease deposits
collect. Clean after each use.
For proper lighting and performance of the burners, keep
the igniter ports clean. It is necessary to clean these when
there is a boil over or when the burner does not light even
though the electronic igniters activate. See "Cleaning
Recommendations" on page 33.
WARNING:
After a spill or boil over, turn off the burner and using
caution due to possible hot surfaces, clean around the
burner and burner ports. After cleaning, check for proper
operation.
Clean the range with caution. Avoid steam burns; DO NOT
use a wet sponge or cloth to clean the range while it is hot.
Some cleaners produce noxious fumes if applied to a hot
surface. Follow directions provided by the cleaner
manufacturer.
DO NOT use flammable cleaners to clean the range.
Be sure all cooktop controls are turned off and the cooktop
is cool before using any type of aerosol cleaner on or
around the cooktop. The chemical that produces the
spraying action could, in the presence of heat, ignite or
cause metal parts to corrode.
When using the oven: DO NOT touch the broiler element,
the interior surfaces of the oven or the exterior area
immediately surrounding the door. Interior oven surfaces
become hot enough to cause burns. The heat deflector,
which deflects heat away from the cooktop and the trim on
the top and sides of the oven door, will also be hot when
the oven is in use.
DO NOT obstruct the flow of combustion or ventilation air.
, WARNING:
Vent
Flush Island
Trim Vent
DO NOT block or obstruct the flow of air
through the ventilation openings. The oven
vent is located at the back of the appliance.
The vents need to be unobstructed and
open to provide necessary airflow that is
important for proper oven performance.
DO NOT touch oven vent area while the
appliance is on and for several minutes
after the appliance is off. Some parts of the
vent and surrounding areas become hot
enough to cause burns. Allow appliance
sufficient time to cool before touching or
cleaning vent areas.
DO NOT position plastic or other heat-
sensitive items on or near the oven vent.
These items could melt or ignite.
Place oven racks in desired position while oven is cool. If a
rack must be moved while the oven is hot, DO NOT let the
potholders contact the broiler element.
Use care when opening the oven door; let hot air or steam
escape before removing or replacing foods.
DO NOT clean, rub, damage, move or remove the door
gasket. It is essential for a good seal during baking. If the
gasket becomes worn or excessively soiled with food
particles, replace gasket to assure a tight seal.
Protect the self=cleaning feature. Clean only those parts
indicated in this booklet. DO NOT use commercial oven
cleaners or oven liner protective coatings of any kind in or
around the self-cleaning oven.
For safety reasons and to avoid equipment damage, never
sit, stand, or lean on the oven door.
English 5
Loading ...
Loading ...
Loading ...