Loading ...
Loading ...
Loading ...
iMPORTANT SAFETY iNSTRUCTiONS
READ AND SAVE THESE INSTRUCTIONS
WARNING:
To avoid possible burn or fire hazard, a backguard
designed specifically for this range must be installed
whenever the range is used.
CAUTION
The high shelf can get hot! DO NOT place the following
items on top of the high shelf:
plastics or containers that can melt
flammable items
a total load over 30 Ibs. (13.6 kg)
WARNING:
ALWAYS DISCONNECT THE ELECTRICAL PLUG
FROM THE WALL RECEPTACLE BEFORE
SERVICING THIS UNIT.
CAUTION
FOR PERSONAL SAFETY, THIS APPLIANCE MUST
BE CONNECTED TO A PROPERLY GROUNDED AND
POLARIZED ELECTRICAL POWER SUPPLY.
30" Dual Fuel Models:
240/208 volts, 60 Hz., 35 Amp electrical circuit required for
each line.
36" Dual Fuel Models:
240/208 volts, 60 Hz., 40 Amp electrical circuit required for
each line.
48" Dual Fuel Models:
240/208 volts, 60 Hz., 50 Amp electrical circuit required for
each line.
It is recommended that a dedicated circuit servicing this
appliance be provided.
The use of gas cooking appliances results in the production
of heat and moisture.
See the Installation Manual for electrical requirements and
grounding instructions.
It is the personal responsibility and obligation of you, the
user, to have this appliance connected to the electrical
power supply by a qualified electrician, in accordance with
the National Electrical Code and/or applicable local codes
and ordinances.
WARNING
IN CASE OF AN ELECTRICAL FAILURE
If for any reason a gas control knob is turned ON and
there is no electrical power to operate the electronic
igniters on the range's cooktop STAR ® burners, turn
OFF the gas control knob and wait 5 minutes for the
gas to dissipate before lighting the STAR burner
manually.
To light the STAR burners manually, carefully hold a
lighted match to the STAR burner ports and turn the gas
control knob to HI. During a power failure, you can use
the standard cooktop STAR burners, but each must be lit
with a match.
DO NOT attempt to light the two left XLO ® STAR
burners and two right XLO STAR burners manually.
These STAR burners are equipped with the ExtraLow ®
feature and cannot be lit manually.
TESTED IN ACCORDANCE WITH:
UL 858, The Standard for the Safety of Household
Electric Ranges
ANSI Z21.1, The American National Standard for
Household Cooking Gas Appliances
CAN 1-1.1-M81, Domestic Gas Ranges
CSA C22.2 No. 61, Household Cooking Ranges
Check your local building codes for the proper method of
installation. In the absence of local codes, this unit should
be installed in accordance with the National Fuel Gas Code
No. Z223.1 current issue and the National Electrical Code
ANSI/NFPA No. 70 current issue or the Can - B149
Installation Codes for Gas Burning Appliances and C22.1
Canadian Electrical Code Part 1.
It is the responsibility of the owner and the installer to
determine if additional requirements and/or standards
apply to specific installations.
English 2
Loading ...
Loading ...
Loading ...