Loading ...
Loading ...
Loading ...
50 CP4 STAGE/CP40 STAGE Owner’s Manual
Appendix
Now working...
This message is displayed while your stage piano is tidying up after, for
example, you press the [EXIT] button to cancel a load or save operation.
Overwrite?
This message is displayed when saving files to confirm whether or not you wish
to overwrite a file of the same name that already exists on the USB flash-memory
device.
Panel Locked.
This message is displayed if you attempt to operate a controller that is currently
disabled by the Panel Lock function. If necessary, press and hold the [PANEL
LOCK] button to unlock all controllers.
Please keep power on...
This message is displayed while your stage piano is writing data to its User
Memory. You should never turn off the stage piano while it is in this state. If this
precaution is not observed, your original settings may be lost or the internal
system may be damaged, rendering the instrument unable to startup normally
when it is next turned on.
Pleasestopaudioplay/rec.
This message is displayed to inform you that the recording or playback of audio
must first be stopped in order to perform the selected operation.
Quick reset
This message is displayed when you have executed the Quick Reset function by
pressing the [ENTER] button with the [SHIFT] button held down. Doing so
causes the currently selected Performance to be initialized and restores the
Performance screen.
Receiving MIDI bulk...
This message is displayed while your stage piano is busy receiving data
created using the Bulk Dump function.
Rec file names all used.
This message is displayed when all possible names that can be automatically
assigned to a recorded audio file have been used. These files are automatically
named “WAV***}{”, where *** is a number from 001 to 999. To proceed, either
delete one or more of these files or rename them using a different naming
format.
System memory crashed.
This message is displayed if a problem occurs while writing data to the
instrument’s internal memory.
Transmitting MIDI bulk...
This message is displayed while your stage piano is busy transmitting MIDI bulk
data.
USB connection terminated.
This message is displayed if connection with the USB flash-memory device was
lost due to an abnormal electric current. Unplug the USB flash-memory device
and press the [ENTER] button to return.
USB device full.
This message is displayed if the connected USB flash-memory device is full and
no more files can be saved on it. In such a case, use a new USB flash-memory
device or make space by erasing unwanted data from the one currently
connected.
USB device not ready.
This message is displayed if you attempt to save data or perform another similar
operation with no USB flash-memory device connected.
USB device read/write
error.
This message is displayed if an error occurs during the exchange of data with
the connected USB flash-memory device or if you attempt to delete or overwrite
a read-only file.
USB device unformatted.
This message is displayed if the connected USB flash-memory device is either
unformatted or formatted in a way that your stage piano does not support. In
such a case, check the content of the USB flash-memory device.
USBdevicewriteprotected.
This message is displayed if the USB flash-memory device has been write
protected.
USB power consumption
exceeded.
This message is displayed if the current being drawn by the USB flash-memory
device exceeds the level supported by your stage piano.
USB transmission error.
This message is displayed if an error occurs while communicating with the
connected USB flash-memory device.
Utility stored.
This message is displayed when Utility settings have been stored.
Message Description
Loading ...
Loading ...
Loading ...