Loading ...
Loading ...
Loading ...
CP4 STAGE/CP40 STAGE Owner’s Manual 33
Quick Start Guide
3 Press the [EDIT] button.
The Edit menu will be displayed.
4 Use the [u] and [d] buttons to select
02: Part, and then press the [ENTER] button.
The Part Edit menu will be displayed. In addition, the
name of the selected Part will be displayed at the top-
left of the screen.
5 Use the [u] button to select 01: Play Mode,
and then press the [ENTER] button.
6 Use the [u] and [d] buttons to move to the
screen’s second pane, and then set the
EffA/BSw parameter (Effect A/B Part Switch)
to “on” using the [l] and [r] buttons and the
Data Dial.
NOTE On the CP4 STAGE, the EffA/BSw parameter can be
turned on for up to two Parts.
7 Press the [EXIT] button to return to the Part
Edit menu. Use the [d] button to select
03: Effect-A, and then press the [ENTER]
button.
The Effect A screen will be displayed.
8 Use the [l] and [r] buttons and the Data
Dial to select a category and a type for
Insertion Effect A.
9 Move the cursor (R) to Preset using the
[r] button, and select a preset* for the effect
type from Step 8 using the Data Dial. (*: Each
preset configures all parameters to suit a
specific need.)
NOTE While each preset configures all parameters to suit a
specific need, you can adjust these parameters if
necessary. To do so, press the [d] button to move to the
screen’s other panes.
10 When you have finished setting Insertion
Effect A, press the [EXIT] button.
The Part Edit menu will again be displayed.
11 Use the [d] button to select 04: Effect-B,
and then press the [ENTER] button.
The Effect B screen will be displayed.
12 Use the [l] and [r] buttons and the Data
Dial to select a category and a type for
Insertion Effect B.
13 Move the cursor (R) to Preset using the
[r] button, and select a preset* for the
effect type from Step 12 using the Data Dial.
(*: Each preset configures all parameters to
suit a specific need.)
14 When you have finished setting Insertion
Effect B, press the [EXIT] button.
If you would like to configure the insertion effects for
a different Part’s Voice, repeat Steps 1 and 2 to first
select the Part, and then repeat Steps 5 to 13.
EDIT
D01:Common
E
EDIT Part:LAYER
D01:PlayMode
E
Part:LAYER ChoSend
Play Mode 0
RevSend EffA/BSw E
40 R onW
Part:LAYER Ctg T
Effect-A RDLY Cr
ype Preset E
sDly BasicD
Effect category Effect type
Part:LAYER Ctg T
Effect-A DLY Cr
ype Preset E
sDly R ShortD
Effect preset
EDIT Part:LAYER
D03:Effect-A
E
Part:LAYER Ctg T
Effect-B RCHO G
ype Preset E
Cho BasicD
Effect category Effect type
Part:LAYER Ctg T
Effect-B CHO G
ype Preset E
Cho R DeepD
Effect preset
Loading ...
Loading ...
Loading ...