Loading ...
Loading ...
Loading ...
14 CP4 STAGE/CP40 STAGE Owner’s Manual
Component Names & Functions
Rear Panel
CP4 STAGE
CP40 STAGE
1 [P] switch (page 17)
On the CP4 STAGE, this Power switch turns the stage
piano on (O) and off (N). On the CP40 STAGE, it is
known as the Standby/On switch and sets the instrument
to on (O) or Standby mode (N).
2 [AC IN] jack (page 15)
Use this jack for the power cord that came with the
instrument.
3 DC IN jack (page 15)
Use this jack for the power adaptor that came with the
instrument.
4 Music stand attachment holes
Use these two holes to attach a music stand (sold
separately).
5 [PHONES] jack (page 16)
Use this standard 1/4” stereo audio jack to connect a pair
of headphones.
6 UNBALANCED [L/MONO] and [R] OUTPUT
jacks (page 16)
Use these two standard 1/4" mono audio jacks together to
output unbalanced stereo signals. Alternatively, if mono
output is required, only the [L/MONO] jack should be
connected.
7 BALANCED [L] and [R] OUTPUT jacks
(page 16)
Use these two XLR-type jacks together to output
balanced audio signals.
8 [AUX IN] jack (page 45)
Use this Auxiliary Input stereo mini-jack to connect other
audio equipment so that its output can be mixed with that
of the stage piano.
NOTE To balance the volumes of the stage piano and the
connected audio equipment, adjust the output volume of
the latter.
9 [TO HOST] USB terminal (page 44)
Use this terminal to connect your stage piano to the USB
terminal of a computer using a USB cable.
) [TO DEVICE] USB terminal (page 39)
Use this terminal to connect a USB flash-memory device
to your stage piano.
! [IN] and [OUT] MIDI terminals (page 45)
Use these two MIDI terminals to link up your stage piano
with other MIDI devices.
@ [SUSTAIN] FOOT SWITCH jack (page 17)
Use this jack to connect an FC3A Foot Switch (provided)
or an optional FC4A or FC5 Foot Switch for use as a
dedicated sustain pedal.
# [ASSIGNABLE] FOOT SWITCH jack (page 17)
Use this jack to connect an optional FC4A or FC5 Foot
Switch in order to perform a range of freely assignable
functions.
$ FOOT CONTROLLER jack(s) (page 17)
The CP4 STAGE features two foot controller jacks, labeled
[1] and [2]; the CP40 STAGE has one. They can be used
to connect an optional FC7 Foot Controller in order to
perform a range of freely assignable functions.
% Air vent
This vent prevents the instrument from overheating.
1
2
%
4
5 6 $7 8 9 ) ! @ #
4
6
4
4
1
! @ # $
5
8 9 )
3
CP4 STAGE only
CP40 STAGE only
CP4 STAGE only
CP4 STAGE only
Loading ...
Loading ...
Loading ...