Loading ...
Loading ...
Loading ...
Using the TIREFIT kit
X
Do not remove any foreign objects which
have penetrated the tire, e.g. screws or
nails.
X
Remove the tire sealant bottle, the accom-
panying TIREFIT sticker and the tire inflation
compressor from the stowage well under-
neath the cargo compartment floor
(Y page 287).
X
Affix part : of the TIREFIT sticker to the
instrument cluster within the driver's field of
vision.
X
Affix part ; of the TIREFIT sticker near the
valve on the wheel with the defective tire.
X
Pull connector ? with the cable and hose
A out of the tire inflation compressor hous-
ing.
X
Screw hose A onto flange B of tire sealant
bottle :.
X
Place tire sealant bottle : head down into
recess ; of the tire inflation compressor.
X
Remove the cap from valve C on the faulty
tire.
X
Screw filler hose D onto valve C.
X
Insert plug ? into a 12 V socket in your
vehicle.
Observe the notes on sockets (Y page 260).
X
Turn the SmartKey to position 1 in the igni-
tion lock (Y page 125).
X
Press on and off switch = on the tire infla-
tion compressor to I.
The tire inflation compressor is switched on.
The tire is inflated.
First, tire sealant is pumped into the tire.
The pressure can briefly rise to approx-
imately 500 kPa (5 bar/73 psi).
Do not switch off the tire inflation com-
pressor during this phase.
X
Let the tire inflation compressor run for a
maximum of five minutes. The tire should
then have attained a pressure of at least
180 kPa (1.8 bar/26 psi).
If a pressure of 180 kPa (1.8 bar/26 psi) has
been attained after five minutes, see "Tire
pressure reached" (Y page 291).
If a tire pressure of 180 kPa (1.8 bar/26 psi)
has not been attained after five minutes, see
"Tire pressure not reached" (Y page 291).
If tire sealant has escaped, clean it off affected
areas as quickly as possible. Use plain water if
possible.
If your clothes are soiled with tire sealant,
have them cleaned with perchloroethylene at a
dry cleaner as soon as possible.
290
Flat tire
Roadside Assistance
Loading ...
Loading ...
Loading ...