Loading ...
Loading ...
Loading ...
is halted after a maximum of ten seconds
and indicator lamp : lights up yellow.
X
Press button ;, = or ? again if neces-
sary.
Clearing the memory
Make sure that you clear the memory of the
integrated garage door opener before selling
the vehicle.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 125).
X
Press and hold buttons ; and ?.
The indicator lamp initially lights up yellow
and then green.
X
Release buttons ; and ?.
The memory of the integrated garage door
opener in the rear-view mirror is cleared.
Compass
Calling up the compass
:
Rear view mirror
;
Compass display
=
Opening
The compass displays in which compass direc-
tion the vehicle is currently traveling: N
N, NENE, EE,
SE
SE, SS, SWSW, WW or NWNW.
To receive a correct compass display reading,
the magnetic field zone must be set and the
compass calibrated.
Setting the compass
X
Set your location using the magnetic field
zone maps (Y page 272).
X
Push a round pen into opening = for
approximately three seconds.
The magnetic field zone currently selected
appears in compass display ;.
X
To select the magnetic field zone: push a
round pen into opening = until the desired
magnetic field zone is selected.
If, after a few seconds, the display in com-
pass display ; changes direction, the mag-
netic field zone has been selected.
Calibrating the compass
Notes
In order to calibrate the compass correctly, do
the following:
R
calibrate the compass in the open and not in
the vicinity of steel structures or high-volt-
age transmission lines.
R
switch off electrical consumers such as the
climate control, windshield wipers or rear
window defroster.
R
close all doors and the tailgate.
Calibrating
X
Make sure that there is sufficient space for
you to drive in a circle without impeding
traffic.
X
Switch on the ignition.
X
Push a round pin into opening = for
approximately six seconds, until symbol C
C is
shown in compass display ;.
X
Drive your vehicle in a full circle at approx-
imately 3 mph (5 km/h) to 6 mph
(10 km/h).
When the calibration has been successfully
completed, the current direction is shown in
compass display ;.
Features
271
Stowage and features
Z
Loading ...
Loading ...
Loading ...