Loading ...
Loading ...
Loading ...
If you come into contact with the electro-
lyte, observe the following:
R
Rinse off the electrolyte from your skin
immediately with water.
R
Immediately rinse the electrolyte out of
your eyes thoroughly with clean water.
R
If the electrolyte is swallowed, immedi-
ately rinse your mouth out thoroughly. Do
not induce vomiting.
R
If electrolyte comes into contact with your
skin or hair or is swallowed, seek medical
attention immediately.
R
Immediately change out of clothing which
has come into contact with electrolyte.
R
If an allergic reaction occurs, seek medi-
cal attention immediately.
The "Automatic anti-glare mirrors" function is
only available if the vehicle is equipped with
the "Mirrors package".
The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-
glare mode if:
R
the ignition is switched on and
R
incident light from headlamps strikes the
sensor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior light-
ing is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking posi-
tion
You can set the front-passenger side exterior
mirror such that you can see the rear wheel on
that side as soon as you engage reverse gear.
You can store this position.
:
Button for the driver's side exterior mirror
;
Button for the front-passenger side exte-
rior mirror
=
Button for the exterior mirror setting
?
Memory button M
X
Make sure that the vehicle is stationary.
X
Turn the SmartKey to position 2 in the igni-
tion lock or start the engine (Y page 125).
X
Press button ;.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the default parking position.
X
Use button = to adjust the exterior mirror
to a position that allows you to see the rear
wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another
position, the front-passenger side exterior
mirror returns to the driving position.
Calling up a stored parking position
setting
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 125).
X
Adjust the front-passenger side exterior mir-
ror using the corresponding button
(Y page 98).
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
R
as soon as you exceed a speed of 9 mph
(15 km/h)
R
about ten seconds after you have disen-
gaged reverse gear
R
when you use button : to select the exte-
rior mirror on the driver's side
100
Mirrors
Seats, steering wheel and mirrors
Loading ...
Loading ...
Loading ...