Loading ...
Loading ...
Loading ...
Automatic interior lighting control
X
To switch on: set the switch to center posi-
tion B.
X
To switch off: set the switch to the |
position.
The interior lighting automatically switches on
if you:
R
unlock the vehicle
R
open a door
R
remove the SmartKey from the ignition lock
The interior lighting is switched on for a set
time when the SmartKey is removed from the
ignition lock. You can set this delayed switch-
off via the multimedia system (see Digital
Operator's Manual).
Replacing bulbs
Important safety notes
G
WARNING
Bulbs, lamps and connectors can get very
hot when operating. If you change a bulb,
you could burn yourself on these compo-
nents. There is a risk of injury.
Allow these components to cool down
before changing a bulb.
Do not use a bulb if it has been dropped or if
its glass tube has been scratched.
The bulb may explode if:
R
you touch it
R
it is hot
R
you drop it
R
you scratch it
Use bulbs only in closed lamps that have been
designed for this purpose. Only install spare
bulbs of the same type and the specified volt-
age.
Marks on the glass tube reduce the service life
of the bulbs. Do not touch the glass tube with
your bare hands. If necessary, clean the glass
tube when cold with alcohol or spirit and rub it
off with a lint-free cloth.
Protect bulbs from moisture during operation.
Do not allow bulbs to come into contact with
liquids.
Replace only the bulbs listed (Y page 106).
Have the bulbs that you cannot change your-
self replaced at a qualified specialist work-
shop.
If you require assistance replacing bulbs, con-
sult a qualified specialist workshop.
If the new bulb still does not light up, consult a
qualified specialist workshop.
Headlamps and lights are an important aspect
of vehicle safety. You must therefore make
sure that these function correctly at all times.
Have the headlamp setting checked regularly.
Vehicles with LED headlamps: the front and
rear lamp clusters of your vehicle are equipped
with LED bulbs. Do not replace the bulbs your-
self. Contact a qualified specialist workshop
which has the necessary specialist knowledge
and tools to carry out the work required.
Overview of bulb types
You can replace the following bulbs. The bulb
type can be found in the legend.
Vehicles with halogen headlamps
:
Turn signal lamp: PY 21 W
;
High-beam headlamps/daytime running
lamps/parking lamps/standing lamps:
H15 55 W/15 W
=
Low-beam headlamps: H15 55 W
106
Replacing bulbs
Lights and windshield wipers
Loading ...
Loading ...
Loading ...