Loading ...
Loading ...
Loading ...
Canada only
:
Sets the temperature, left (Y page 119)
;
Sets climate control to automatic (Y page 119)
=
Defrosts the windshield (Y page 120)
?
Increases the airflow (Y page 120)
A
Sets the air distribution (Y page 120)
B
Display
C
Switches air-recirculation mode on/off (Y page 122)
D
Activates/deactivates climate control (Y page 118)
E
Sets the temperature, right (Y page 119)
F
Switches the residual heat on or off (Y page 122)
G
Switches cooling with air dehumidification on/off (Y page 118)
H
Reduces the airflow (Y page 120)
I
Switches the rear window defroster on/off (Y page 122)
J
Switches the ZONE function on/off (Y page 120)
Optimum use of dual-zone automatic
climate control
Climate control system
The following contains instructions and recom-
mendations to enable you to get the most out
of your dual-zone automatic climate control.
R
Activate climate control using the à and
¿ buttons. The indicator lamps in the
à and ¿ buttons light up.
R
Set the temperature to 72 ‡ (22 †).
R
Only use the "Windshield defrosting" func-
tion briefly until the windshield is clear
again.
R
Only use air-recirculation mode briefly, e.g.
if there are unpleasant outside odors or
when in a tunnel. The windows could other-
wise fog up, since no fresh air is drawn into
the vehicle in air-recirculation mode.
R
Use the ZONE function to adopt the temper-
ature settings on the driver's side for the
front-passenger side as well. The indicator
lamp in the á button goes out.
R
Use the residual heat function if you want to
heat or ventilate the vehicle interior when
the ignition is switched off. The residual
heat function can only be activated or deac-
tivated with the ignition switched off.
R
If you change the settings of the climate
control system, the climate status display
appears for approximately three seconds at
the bottom of the screen on the multimedia
system display; see Digital Operator's Man-
Overview of climate control systems
117
Climate control
Loading ...
Loading ...
Loading ...