Loading ...
Loading ...
Loading ...
40 Philips · HDP16x0 & HDP16x0TV
The device turns itself off • When the device is running for a long period of time,
the surface becomes hot and a warning symbol
appears on the projection
(see Symbols in the Status-
bar, page 9). The device automatically turns off when
it gets too hot. After the device has cooled down,
you can continue playback.
• Check that the power cable is connected correctly.
• Check the sleep mode status in the setting menu ().
When the sleep mode is activated, the device turn
off after the programmed duration.
The device changes from maximum level of brightness to
minimum level of brightness when the device is connect
-
ed over USB to play videos.
• When the environment temperature is too high, the
devices turns automatically from maximum level of
brightness to minimum level of brightness in order to
protect the high power LED.
• Use the device with lower environment tempera-
tures.
The device cannot connect with an Android device (for
example a mobile phone/smartphone with the Android
operating system) when connected via USB.
• Deactivate the function „USB debugging“ in the set-
tings menu of your Android device before connect-
ing the Projector via USB; your Android device
should be recognized as USB storage medium.
Bad image or color quality when connecting with HDMI • Use a high quality HDMI cable. Low quality cables
may cause signal distortions.
The device cannot read the SD card. • Check that the memory card is compatible (see the
list in the chapter Appendix).
The device cannot read the USB stick • The device does not support the exFAT file system.
• Format the USB key in FAT format, then use it.
The TV icon doesn't appear while the DVB-T module is
installed.
• Call the hot-line.
The projector does not react to remote control com-
mands when using the RF remote control.
• Check if the remote control batteries are new.
• The remote control has to be paired with the USB
receiver again. For renewing the pairing please con
-
nect the USB receiver to a rear USB port of the
Screeneo. Then pressing the red and blue key on the
remote control together for 5
s to 10 s at the same
time.
Problems Solutions
Screeneo_User-Manual_HDP16x0_V1-1_EN-US_253634032-A.book Page 40 Jeudi, 12. février 2015 11:31 11
Loading ...
Loading ...
Loading ...