Loading ...
Loading ...
Loading ...
Connect to the Playback Device 19
Update the software in my
projector
You can find the Screeneo firmware version on the site
«
Philips »: www.philips.com/screeneo for loading the
file proceed as following
You must download the file on SD-card formatted
FAT16 or FAT32, on USB stick or on USB digital sup
-
port in order to update your Screeneo.
Get yourself a suitable digital media and insert it into
your computer.
1 Launch an Internet browser, in the address bar, type
the address: www.philips.com/screeneo.
2 Choose your country and click on the language.
3 Click on View All 4 Products for select your model.
4 Select exactly your model with mouse.
5 In the new screen, research Support and click on.
6 The "Screeneo Smart LED projector" screen
appears. In the "Software & drivers" select your
language and click Download file.
7 Depending on the browser used, save the file in the
root of your digital media.
8 On the Screeneo projector, to check that it is turned
off (OFF).
9 Remove the digital media on your computer and
insert it into the port of Screeneo for your digital
media.
10
11 Long press the ON/OFF button on the projector to
turn it on.
12 After the initial screen, the main menu appears. Use
the navigation keys to select Settings.
13 Confirm with OK.
14 Use / to select Maintenance.
15 Confirm with OK.
16 Use / to select Firmware Update.
17 Confirm with OK.
18 Use / to select Install.
19 Confirm with OK.
20 The device turns off and on again. After around 5
minutes the Language Selection screen appears. The
firmware update is now completed.
Copy the software on digital
media (eg USB-stick)
Use the USB ports on the projector to insert digital
media.
1 Use / to select APPs.
2 Confirm with OK.
3 Use / to select Explorer.
4 Confirm with OK.
5 Use / to select Internal Flash.
6 Confirm with OK.
7 Use to select Download.
8 ScreeneoWLink_Setup.exe file appears in the main
window.
9 Press long OK button on the remote control.
10 Use / to select Copy.
11 Confirm with OK.
12 Use //À/Á you move on to the digital
media that you have connected.
13 Confirm with OK.
14 Press long OK button on the remote control.
15 Use / to select Paste.
16 Confirm with OK.
17 ScreeneoWLink_Setup.exe file is copied to the digi-
tal media. Wait that it appears in the browser win-
dow before removing the digital media projector.
Install the ScreeneoWLink
software on my computer
1 Insert the digital media containing the Screene-
oWLink_Setup.exe file on an appropriate port on
your computer.
2 On desktop PC or laptop, select the digital media
containing the file and double click the executable.
3 Follow the instructions that appear on the screen.
4 Agree to have the ScreeneWLink icon on your desk-
top.
5 When installation is complete, restart your com-
puter.
Notice
The file on the website is a zip file. It has to be
unpacked and put on the root folder of the
SD-card or USB-stick.
DANGER!
Inserting the digital media!
Never pull out the digital media while the
device is accessing it. This could cause data
to be damaged or lost.
Switch the device off in order to make sure
that the device does not access the
memory card.
Notice
If an error occurs during the firmware update
process retry the procedure or contact your
dealer.
Screeneo_User-Manual_HDP16x0_V1-1_EN-US_253634032-A.book Page 19 Jeudi, 12. février 2015 11:31 11
Loading ...
Loading ...
Loading ...