Loading ...
Loading ...
Loading ...
Switching on
The cooler can be operated at two levels.
1. Turn on operations.
2.
Press button once for each cooling
level.
The highest cooling power is active when
two LEDs are lit.
If the cooler was switched on the last time op‐
erating readiness was switched off, it will like‐
wise be switched on the next time operating
readiness is switched on.
Switch off
Press button repeatedly until the LEDs go out.
Removing
1.
Pull on the rear handle.
2. Pull cooler backward and remove it.
3. Fold the cover back.
Installing
1.
Open the cover.
2. Pull on the rear handle and push the cooler
into the guide rails.
3. Fold the handle back again.
Malfunction
The cooler cannot be switched on or switches
off, e.g., when the cooling system overheats or
if the battery voltage is low. One of the LEDs
flashes.
Remedy the problem
1.
If necessary, allow the refrigerator cooling
system to cool down.
2. Start the engine.
3. Switch on cooler.
If the LED flashes even after a short time, have
the cooler checked by a dealer’s service center
or another qualified service center or repair
shop.
Ski and snowboard bag
The ski and snowboard bag is contained in a
protective jacket in the trunk.
Follow the installation and operation instruc‐
tions included in the protective jacket.
If equipped with emergency wheel: remove the
emergency wheel from the vehicle to mount
the ski and snowboard bag.
Seite 224
Controls Interior equipment
224
Online Edition for Part no. 0140 2 964 330 - VI/15
Loading ...
Loading ...
Loading ...