Loading ...
Loading ...
Loading ...
General information
The use of Launch Control causes premature
component wear since this function represents
a very heavy load for the vehicle.
Do not use Launch Control during the break-in,
refer to page 234, period.
To increase vehicle stability, activate DSC
again as soon as possible.
An experienced driver may be able to achieve
better acceleration values in DSC OFF mode.
Requirements
Launch Control is available when the engine is
warmed up, that is, after uninterrupted driving
of at least 6 miles/10 km.
To start with Launch Control do not steer the
steering wheel.
Start with launch control
While the engine is running:
1. Press button.
TRACTION is displayed in the instrument
cluster and the indicator lamp for DSC OFF
lights up.
2. Engage selector lever position S.
3. With the left foot, forcefully press down on
the brake.
4. Press and hold down the accelerator pedal
beyond the resistance point at the full
throttle position, kickdown.
A flag symbol is displayed in the instru‐
ment cluster.
5. The starting engine speed adjusts. Within
3 seconds, release the brake.
Before using Launch Control, allow the trans‐
mission to cool down for approx. 5 minutes.
Launch Control adjusts to the surrounding
conditions, e.g., wet pavement, when used
again.
Driving Dynamics Control
The concept
The Driving Dynamics Control influences the
driving dynamics properties of the vehicle. The
vehicle can be adjusted depending on the sit‐
uation using various driving modes.
The following systems are affected:
▷ Engine characteristics.
▷ Steptronic transmission.
▷ Dynamic Damping Control.
▷ Air suspension
▷ Active roll stabilization.
▷ Integral Active Steering.
▷ Display in the instrument cluster.
▷ Cruise control.
▷ Backrest width for comfort seats.
Overview
Controls
Drive modes
Press but‐
ton
Drive mode Configuration
SPORT INDIVIDUAL
COMFORT PLUS
ECO PRO INDIVIDUAL
ADAPTIVE
Seite 110
Controls Driving
110
Online Edition for Part no. 0140 2 964 330 - VI/15
Loading ...
Loading ...
Loading ...