Loading ...
Loading ...
Loading ...
72
Servicing Your Honda
Suspension
1. Remove the fork cap, and fork spring as
described in Front Suspension Oil Level
(page 94).
2. Pour out the fork oil by pumping the fork tube
and piston rod (1) eight - ten times with the rod
end down as shown.
Pour the drained oil into a suitable container and
dispose of it in an approved manner (page 130).
NOTICE
Improper disposal of drained oil is harmful to the
environment.
3. Pour half of the recommended fork oil into the
fork slider and fork tube.
4. Raise the fork tube (2) and cover the top of the
tube with your hand. Compress the fork tube
fully, then release your hand. Use your other
hand to secure the fork tube. Repeat this
procedure three times.
5. Pour the remaining fork oil into the piston rod
until a little oil flows out of the top of the rod.
Pump the piston rod slowly eight - ten times
through a stroke of 10 in (25 cm). Gently slide
the fork tube down onto the lower end of the
slider pipe (3).
Wait about 5 minutes.
Recommended Fork Oil
suggested oil HP Fork Oil, SS-19
Fork Oil Change
(1) piston rod
(1)
(2) fork tube
(1) piston rod
(2) fork tube
(3) lower end of the slider
pipe
(2)
(1)
(2)
(2)
(3)
31KSE7100_NA.book 72 ページ ２０１９年４月９日 火曜日 午後１時１３分
Loading ...
Loading ...
Loading ...