Loading ...
Loading ...
Loading ...
Servicing Your Honda
33
Subframe
Installation
1. Loosely attach the upper and lower ends of the
subframe (1) to the mainframe while
connecting the air cleaner connecting tube to
the carburetor.
Be careful not to bend the subframe.
Install the subframe upper mounting bolt (2)
and lower mounting bolts (3).
Tighten the upper mounting bolt and lower
mounting bolts to the specified torque:
22 lbf·ft (30 N·m, 3.1 kgf·m)
2. Make sure the carburetor tab (4) aligns with the
air cleaner connecting tube groove (5).
3. Tighten the connecting tube clamp screw (6)
so the gap between the tabs of the clamp is
0.1 ± 0.04 in (3 ± 1mm).
4. Connect the crankcase breather tube (7).
5. Route the transmission breather tube (8) into
the air cleaner housing.
6. Install the seat (page 29).
7. Install the muffler (page 86).
(1) subframe
(2) subframe upper mounting bolt
(3) subframe lower mounting bolts
(2)
(1)
(3)
(4) carburetor tab
(5) air cleaner connecting tube groove
(6) connecting tube clamp screw
(7) crankcase breather tube
(8) transmission breather tube
(5)
(4)
(6)
0.1 0.04 in (3 1 mm)
(8)
(7)
31KSE7100_NA.book 33 ページ ２０１９年４月９日 火曜日 午後１時１３分
Loading ...
Loading ...
Loading ...