Loading ...
Loading ...
Loading ...
Servicing Your Honda
35
Fuel System
The fuel filter is mounted on the bottom left side of
the fuel tank. Dirt accumulated in the filter will
restrict the flow of the fuel to the carburetor.
Therefore, the fuel filter should be serviced
frequently.
To service the fuel filter:
1. Drain the fuel from the fuel tank into an
approved gasoline container.
2. Remove the fuel tank (page 30)
3. Remove the fuel valve (1) from the fuel tank by
removing the bolts/collars (2).
4. Wash the fuel filter (3) in high flash-point
cleaning solvent.
5. Make sure the O-ring (4) is in good condition
and install it onto the fuel valve.
6. Install the fuel valve in the fuel tank by
tightening the bolts/collars to the specified
torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
7. Install the fuel tank (page 31) and refill the
fuel.
Turn the fuel valve ON; check for leaks.
Fuel Filter
(1) fuel valve (2) bolts/collars
(2)
(1)
(3) fuel filter (4) O-ring
(4)
(3)
31KSE7100_NA.book 35 ページ ２０１９年４月９日 火曜日 午後１時１３分
Loading ...
Loading ...
Loading ...