Loading ...
Loading ...
Loading ...
Front Suspension Adjustments
(cont’d)
Adjustments for Competition
95
4. Remove the front axle nut (3).
5. Pull the front axle shaft (4) out of the wheel
hub and remove the front wheel.
6. Remove the fork protectors (5) and brake
caliper (6).
• Do not support the brake caliper by the brake
hose.
• Do not operate the brake lever after the front
wheel is removed. To do so will cause
difficulty in fitting the brake disc between the
brake pads.
7. Loosen the fork bridge lower pinch bolts (7),
then pull the fork legs down and out.
8. Clean the fork assembly, especially the sliding
surface of the slider pipe (8) and dust seal (9).
NOTICE
The fork tube (10) can drop on the slider and
damage the fork dust seal and guide bushing (11)
when the fork cap is removed. To avoid damage
hold both the fork tube and slider pipe when
removing the fork cap.
9. Record the rebound damping adjuster position
and turn the adjuster screw (12)
counterclockwise until it stops.
10. Hold the fork tube (10), then remove the fork
cap (2), from the fork tube. Gently slide the
fork tube down onto the lower end of the slider
pipe (13).
NOTICE
When removing the fork cap, be careful not to
damage the damping force adjuster needle rod
(14) and the needle on the rod end.
11. Remove the fork cap (2) from the piston rod
(15) by holding the lock nut (16).
12. Remove the fork spring (17).
(3) front axle nut (4) front axle shaft
(5) fork protectors (6) brake caliper
(3)
(4)
(6)
(5)
(7) fork bridge lower pinch bolts
(8) slider pipe (10) fork tube
(9) dust seal (11) guide bushing
(7)
(9)
(8)
(11)
(10)
(2) fork cap (12) adjuster screw
(10) fork tube (13) slider pipe, lower end
(2) fork cap (16) lock nut
(14) adjuster needle rod (17) fork spring
(15) piston rod
(12)
(10)
(2)
(10)
(13)
(2)
(16)
(15)
(14)
(17)
31KSE7100_NA.book 95 ページ ２０１９年４月９日 火曜日 午後１時１３分
Loading ...
Loading ...
Loading ...