Loading ...
Loading ...
Loading ...
Auto-Up Feature With Auto-Reverse Protection — If
Equipped
The driver door power window switch and the front
passenger door window switch have an Auto-Up feature.
Pull the window switch up, for about half a second, and
release and the window will go up automatically.
To stop the window from going all the way up during the
Auto-Up operation, pull up or push down on the switch
briefly.
To close the window part way (manually), pull the window
switch up briefly and release it.
NOTE:
• If the window runs into any obstacle during auto-
closure, it will reverse direction and then go back down.
Remove the obstacle and use the window switch again
to close the window.
• Any impact due to rough road conditions may trigger
the auto-reverse function unexpectedly during auto-
closure. If this happens, pull the switch and hold to close
the window manually.
WARNING!
There is no auto-reverse protection when the window
is almost closed. To avoid personal injury be sure to
clear your arms, hands, fingers and all objects from the
window path before closing.
Reset Auto-Up
Should the Auto-Up feature stop working, the window
probably needs to be reset. To reset Auto-Up:
1. Pull the window switch up to close the window com-
pletely and continue to hold the switch up for an
additional two seconds after the window is closed.
2. Push the window switch down firmly to open the
window completely and continue to hold the switch
down for an additional two seconds after the window is
fully open.
3
GETTING TO KNOW YOUR VEHICLE 87
Loading ...
Loading ...
Loading ...