Loading ...
Loading ...
Loading ...
CAUTION!
Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the Jacking
Instructions for this vehicle.
1. Remove the spare tire, jack, and wheel bolt wrench.
2. If equipped with wheels where the center cap covers the
wheel bolts, use the wheel bolt wrench to pry the center
cap off carefully before raising the vehicle.
3. Before raising the vehicle, use the wheel bolt wrench to
loosen, but not remove, the wheel bolts on the wheel
with the flat tire. Turn the wheel bolts counterclockwise
one turn while the wheel is still on the ground.
4. Place the jack underneath the jacking location that is
closest to the flat tire. Jacking location is indicated by a
stamped arrow on the body. Turn the jack screw clock-
wise to firmly engage the jack saddle with the lift area of
the sill flange, centering the jack saddle inside the cutout
in the sill cladding.
Jack Warning Label
Jacking Locations
408 IN CASE OF EMERGENCY
Loading ...
Loading ...
Loading ...