Loading ...
Loading ...
Loading ...
This function can be activated or deactivated by the
Uconnect Settings through the radio. Refer to “Uconnect
Settings” in the “Multimedia” for further information.
The sensitivity of the system can be adjusted with the
multifunction lever. Wiper delay position one is the least
sensitive, and wiper delay position two is the most sensi-
tive. Place the wiper switch in the off position when not
using the system.
Rain Sensing Wipers – Inhibition
When the user switches the ignition from OFF to RUN or
START with the lever already in the intermittent position,
no wipe cycle is performed for safety reasons. This tempo-
rary inhibition avoids accidental activations of the wiping
(e.g during the hand washing of the windscreen, blocking
the blades in ice/snow conditions). The user can activate
the Rain Sensing Wipers in three ways:
• Moving the level in off position and then in Intermittent
positions.
• One MIST command actuation.
• The vehicle speed exceeds 3 mph (5 km/h) and the rain
sensor detects the presence of rain.
NOTE: On vehicles equipped with automatic transmission,
the Rain Sensing Wipers will become inactive even if the
lever is in one of the intermittent positions if the vehicle is
placed in NEUTRAL and the vehicle speed is less than
3 mph (5 km/h). This prevents damage to the windshield
wipers during an automatic car wash.
Rain Sensor
66 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...