Loading ...
Loading ...
Loading ...
▷ When multiple remote controls are located
outside on the driver's side of the vehicle.
If the remote control was not detected clearly,
unlock the vehicle by pressing button for the de‐
sired remote control.
ConnectedDrive countries:
A driver profile can only be created and
synchronized with the ConnectedDrive account
when cellular network reception is available.
The use of personal settings that are stored in
the ConnectedDrive account in other vehicles is
subject to technical limitations. For example, set‐
tings may be stored for a system that is not avail‐
able, or available in a non-compatible version, in
other vehicles.
Valet parking mode
Concept
In the valet parking mode, the Control Display is
locked and operation via iDrive is no longer pos‐
sible.
For example, this mode can be used when the
vehicle is handed over for valet parking.
General information
In the valet parking mode, it is not possible to
change vehicle settings via iDrive. Personal set‐
tings cannot be changed and personal data can‐
not be displayed.
Additionally, the following actions are carried out:
▷ The volume of the audio system is limited.
▷ The integrated remote control is deactivated.
▷ DSC cannot be switched off.
▷ The trunk lid can be locked and disconnected
from the central locking system.
Functional requirements
▷ At least one driver profile has been created.
▷ A driver profile or the guest profile is active.
▷ At least one driver profile has an assigned
ConnectedDrive account.
Accessing the menu for the valet
parking mode
Via the switch-off screen
After switching off drive-ready state the switch-
off screen will be displayed. Select the entry for
the valet parking mode on the switch-off screen.
Via the display bar at the upper edge
of the Control Display
1.
Tip the Controller up
2. "Valet parking mode"
Via the vehicle settings
Via iDrive:
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Valet parking mode"
Activating the valet parking
mode
General information
Before activating the valet parking mode, a PIN
must be set up to be able to deactivate the valet
parking mode at a future time.
The procedure for entering the PIN varies de‐
pending on the active driver profile.
Driver profile with PIN
A PIN has been stored for the active driver pro‐
file.
It is not necessary to enter another PIN.
1.
Select the desired setting:
"Lock tailgate as well"
Seite 98
CONTROLS
Opening and closing
98
Online Edition for Part no. 01402720932 - II/19
Loading ...
Loading ...
Loading ...