Loading ...
Loading ...
Loading ...
Sensitivity of the high-beam
Assistant
General information
The sensitivity of the high-beam Assistant can
be adjusted.
Safety information
Warning
If adjustments have been made or the sensitiv‐
ity has been modified, oncoming traffic may be
momentarily blinded. There is a risk of accident.
If adjustments have been made and the sensi‐
tivity has been modified, make sure that on‐
coming traffic is not momentarily blinded.
Switch off the high beams manually if required.
Adjusting the sensitivity
Pull the turn signal lever for approxi‐
mately 10 seconds. The system responds more
sensitively.
A Check Control message is displayed.
Resetting the sensitivity
Pull the turn signal lever again for approx. 10 sec‐
onds. The sensitivity of the high-beam Assistant
is reset to the factory settings.
System limits
The high-beam Assistant cannot serve as a sub‐
stitute for the driver's personal judgment of when
to use the high beams. In situation that require
this, therefore switch off manually.
The system is not fully functional in the following
situations, and driver intervention may be neces‐
sary:
▷ In very unfavorable weather conditions, such
as fog or heavy precipitation.
▷ When detecting poorly-lit road users such as
pedestrians, cyclists, horseback riders and
wagons; when driving close to train or ship
traffic; or at animal crossings.
▷ In tight curves, on hilltops or in depressions,
in crossing traffic or half-obscured oncoming
traffic on highways.
▷ In poorly-lit towns and cities or in the pres‐
ence of highly reflective signs.
▷ When the windshield in front of the interior
mirror is fogged over, dirty or covered with
stickers, etc.
Laser high beams
Concept
The range of the high beams is increased and
ensures an even better illumination of the road.
General information
When the high beams are switched-on, starting
with a speed of approx. 37 mph/60 km/h, the la‐
ser high beams in the headlight are automatically
switched on in addition to the LED high beams.
Depending on the country variant, further infor‐
mation can be obtained from the laser label on
the headlight.
Safety information
The label is in the headlight and is visible from
the outside.
Seite 170
CONTROLS
Lights
170
Online Edition for Part no. 01402720932 - II/19
Loading ...
Loading ...
Loading ...