Loading ...
Loading ...
Loading ...
Parking space search and system
status
▷ Parking assistant is activated and parking
space search is active.
▷ Control Display shows suitable parking
spaces at the edge of the road next to the ve‐
hicle symbol. When Park Assistant is active,
suitable parking spaces are highlighted and
an acoustic signal sounds. Switch signal tone
on/off, refer to page 254.
▷ If a diagonal or parallel parking space is clearly
detected, the system automatically adjusts
the suitable parking method. In the case of
parking spaces suitable for parallel and diago‐
nal parking, a selection menu is displayed. In
this case, the desired parking method must
be selected manually.
▷ The parking procedure is active. Steering
control has been taken over by system.
▷ Parking space search is always active when‐
ever the vehicle is moving forward slow and
straight, even if the system is deactivated.
When the system is deactivated, the displays
on the Control Display are shown in gray.
Parking using the parking
assistant
Parking
1.
Switching on and activating the parking assis‐
tant.
Engage the reverse gear and activate the
system or press the parking assistance but‐
ton, refer to page 252, on the Control Display.
Parking assistant is activated.
2. Pass the row of parked vehicles at a speed of
up to approx. 22 mph/35 km/h and at a dis‐
tance of maximum 5 ft/1.5 m.
The status of the parking space search and
possible parking spaces are displayed on the
Control Display, refer to page 253.
3. Confirm the suggested parking space for the
parking process: select the parking space on
the Control Display.
The system takes over the steering.
4. Follow the instructions on the Control Dis‐
play.
At the end of the parking procedure, the P
selector lever position is set.
The end of the parking procedure is indicated
on the Control Display.
5. Adjust the parking position yourself, if
needed.
Interrupting manually
The parking assistant can be interrupted at any
time:
▷ Press the park assistance button.
▷ "Autom. Parking" Select the symbol on
the Control Display.
Interrupting automatically
The system is interrupted automatically in the
following situations:
▷ If the driver grasps the steering wheel or
takes over steering.
▷ Possibly on snow-covered or slippery road
surfaces.
▷ When there are obstacles that are hard to
overcome, such as curbs.
▷ When there are obstacles that suddenly ap‐
pear.
▷ If the PDC Park Distance Control displays
clearances that are too small.
Seite 253
Driver assistance systems
CONTROLS
253
Online Edition for Part no. 01402720932 - II/19
Loading ...
Loading ...
Loading ...