User Manual - Page 92

For 2020 BMW 7 Series.

Loading ...
Loading ...
Loading ...
The unlocking zone is located within a radius of
approx. 3 ft/1 m around the door handles.
The vehicle will be locked when the remote con‐
trol leaves the locking zone.
The locking zone is located within a radius of ap‐
prox. 7 ft/2 m around the door handles.
If the remote control is located in the unlocking
zone for an extended period of time without
movement, the vehicle will be locked automati‐
cally.
If a passenger is detected in the front passenger
seat during locking and the safety belt of the
front passenger is engaged in the safety belt
buckle during locking:
The vehicle will be locked but not secured
against theft.
The fuel filler flap remains unlocked.
The behavior of the vehicle during touchless un‐
locking and locking depends on the following
settings, refer to page 99:
If the automatic unlocking is active.
If the automatic locking is active.
If only the driver's door and the fuel filler flap
or all access to the vehicle will be unlocked.
Only driver's door and fuel filler flap: the driv‐
er's door and fuel filler flap will only be un‐
locked when the driver approaches the vehi‐
cle on the driver's side.
All vehicle entry points: the vehicle will be un‐
locked regardless of the side on which the
driver approaches the vehicle.
If the unlocking and locking of the vehicle is
confirmed with a light signal or a sound sig‐
nal.
If the welcome light, refer to page 167, is
switched on when the vehicle is being un‐
locked.
If the headlight courtesy delay feature, refer
to page 168, is activated during locking.
If the exterior mirrors are automatically folded
out and in when the vehicle is unlocked and
locked.
Functional requirements
The drive-ready state must be turned off.
Unlocking: when entering the unlocking zone,
the doors and trunk lid must be closed.
Locking: when leaving the locking zone, the
doors and trunk lid must be closed.
If the vehicle was locked with the remote
control, it cannot be unlocked touchless. In
this case, unlock the vehicle using the out‐
side door handle.
If the vehicle was unlocked with the remote
control, it cannot be locked touchless without
driving the vehicle first. In this case, lock the
vehicle using the outside door handle.
For touchless locking of the vehicle, no sec‐
ond remote control can be located in the
locking zone.
If the vehicle has been in the idle state for
several days, touchless unlocking and locking
is not possible until after the vehicle has been
driven.
Malfunction
Remote control detection by the vehicle may
malfunction under the following circumstances:
The battery of the remote control is dis‐
charged. For replacing the battery, refer to
page 81.
Interference of the radio connection from
transmission towers or other equipment with
high transmitting power.
Shielding of the remote control due to metal
objects.
Do not transport the remote control together
with metal objects.
Interference of the radio connection from mo‐
bile phones or other electronic devices in di‐
rect proximity to the remote control.
Do not transport the remote control together
with electronic devices.
Seite 92
CONTROLS
Opening and closing
92
Online Edition for Part no. 01402720932 - II/19
Loading ...
Loading ...
Loading ...