Loading ...
Loading ...
Loading ...
Switching on
The cooler can be operated at two levels.
1. Switch on standby state.
2.
Press the button once for each cool‐
ing level.
The highest cooling power is active when two
LEDs are lit.
If the cooler was switched on the last time
standby state was switched off, it will be
switched on automatically the next time standby
state is switched on.
Switching off
Press the button repeatedly until the LEDs go
out.
Ejecting
1.
Fold the cover away to the side.
2. Pull on the rear handle.
3. Pull cooler backward and remove it.
4. Fold the cover back.
Installing
1. Open the cover.
2. Slide the cooler into the guide rail, until it
stops.
3. Fold the cover back and secure to cooler.
Malfunction
Message
One of the LEDs flashes.
The cooler cannot be switched on or switches
off, for instance when the cooling system over‐
heats or if the battery voltage is low.
Seite 296
CONTROLS
Interior equipment
296
Online Edition for Part no. 01402720932 - II/19
Loading ...
Loading ...
Loading ...