Loading ...
Loading ...
Loading ...
cle will automatically apply the stored settings in
the driver profile.
General information
Three personal driver profiles can be created.
Each driver profile can be protected with a PIN to
prevent other drivers from viewing and modifying
the stored settings.
In addition, a guest profile is available that can be
selected by any driver. The guest profile is active
when a personal driver profile has not been se‐
lected.
Changes to the vehicle settings are automatically
stored in the active driver profile or in the guest
profile.
A remote control can be assigned to a driver pro‐
file so that the vehicle will apply the settings as
soon as the driver unlocks the vehicle. As soon
as the vehicle detects the remote control, the
corresponding driver profile will be activated.
ConnectedDrive countries: The settings stored
in the driver's profile can be synchronized with
the personal BMW ConnectedDrive account. It is
thereby possible to use these settings in other
BMW vehicles as well.
Functional requirements
When switching the driver profile, the vehicle
must move at a maximum of walking speed.
Welcome screen
After the Control Display is switched on, the Wel‐
come screen will be displayed.
The following actions can be carried out on the
Welcome screen:
▷ Selecting a driver profile.
▷ Starting the set-up assistant.
This option is offered in new vehicle for a lim‐
ited period of time.
As soon as the engine is started or any button is
pressed, the Welcome screen will be hidden.
Setup assistant
The setup assistant is offered in new vehicles for
a limited period of time on the Welcome screen
to configure the most important settings for the
vehicle.
The driver is guided step by step through the fol‐
lowing functions:
▷ Setting the system language.
▷ Pairing mobile devices with the vehicle.
▷ Non-ConnectedDrive countries: Assign pro‐
file name.
▷ ConnectedDrive countries:
Enable continuous synchronization between
the ConnectedDrive account and the driver
profile.
Stored settings in the ConnectedDrive ac‐
count are transferred to the vehicle. If a Con‐
nectedDrive account has not yet been cre‐
ated, it must be created in the
ConnectedDrive portal.
▷ Confirm the consent for the transmission of
vehicle related data.
▷ Configure the voice command to start the
voice command response.
▷ Switch on the gesture control.
The selected settings are stored in the active
driver's profile.
Guest profile
The guest profile can be activated by any driver.
Vehicle settings that are entered when the guest
profile is active will be stored in the guest profile.
In the following cases the guest profile is auto‐
matically active:
▷ A driver profile has not been created yet.
▷ No driver profile has been assigned to the re‐
mote control that was used to unlock the ve‐
hicle.
▷ No driver profile has been assigned to the
digital key that was used to unlock the vehi‐
cle.
Seite 95
Opening and closing
CONTROLS
95
Online Edition for Part no. 01402720932 - II/19
Loading ...
Loading ...
Loading ...