Loading ...
Loading ...
Loading ...
402
5-3. Connectivity settings
*
: Vehicles equipped with DCM
only. This function is not made
available in some countries or
areas.
1 Enable the Wi-Fi
®
Hotspot
function. (P.403)
2 Disable the “Hide Access
Point” function. (P.403)
3 Search for the vehicle access
point using the device you
wish to connect.
For details about operating
the device, refer to the docu-
mentation which came with it.
4 Operate the device to con-
nect it to the vehicle access
point.
To check the vehicle access
point password, check “Pass-
word”. (P.403)
● Hints for connecting to the vehicle
via Wi-Fi
®
can be displayed.
(P.403)
1 Enable the Wi-Fi
®
Hotspot
function. (P.403)
2 Enable the “Hide Access
Point” function. (P.403)
3 Enter the access point name
(SSID) into the device you
wish to connect and connect
it.
To check the vehicle access
point password, check “Pass-
word”. (P.403)
The security settings on the
device must be the same as
that displayed for “Security”.
(P.403)
For details about operating
the device, refer to the docu-
mentation which came with it.
Wi-Fi
®
Hotspot
*
By connecting a device to
the vehicle via Wi-Fi
®
, it can
access the internet through
the DCM.
To use this function, a
W-Fi
®
Hotspot service sub-
scription from AT&T is
required. Connect your
device to the in-vehicle
access point (see instruc-
tions below), or contact your
Toyota dealer for details.
Connecting a device to
the in-vehicle access
point
Searching for and con-
necting a device to the
vehicle access point
Connecting a device to the
in-vehicle access point
using the access point
name (SSID)
Loading ...
Loading ...
Loading ...