Loading ...
Loading ...
Loading ...
Maintenance and Troubleshooting
38
Push2TV Wireless Display Adapter PTV3000
• Pressing the Input button on some remote controls results in a list of inputs on the TV
screen.
Simply select the input that you want.
• Y
ou select the input on some TVs by pressing the Input button on the front or side panel
of the TV screen.
Simply press the button until the input that you want is selected.
• Sometimes the inputs are located beneath the regular channels on the
TV.
Try selecting the lowest TV channel and then go down one channel.
The Push2TV Adapter Encountered a Problem on Startup
If the Push2TV adapter is experiencing technical difficulties, turn off the Push2TV adapter
and turn it on again.
The Push2TV Adapter Is Not Detected
It might be necessary to scan multiple times. If rescanning does not solve the issue, make
sure that the Push2TV adapter is turned on and that the TV is displaying the Ready for
connection screen.
Also, try moving the laptop or the Push2TV adapter to different places in the room. The
Push2TV adapter and
TV should be in the same room to work correctly. If this does not work,
see Common Solutions to Many Issues on page 41.
Security Code Message While You Attempt to Connect
If you get a message That security code is not correct after you have entered a security code
while you are trying to make a connection between the Push2TV adapter and your TV, you
have entered the wrong security code. Make sure that you type the code exactly as shown on
the TV screen. The security code number changes after an incorrect entry.
If the connection fails right after you have entered a correct security code, you need to try to
connect again and retype the security code.
Unsupported Audio Mode
The laptop has to have specific audio settings for Intel WiDi to work correctly. NETGEAR
recommends that you do not adjust these settings to an unsupported audio mode. The
Unsupported audio mode screen displays if the audio display settings need adjusting.
To restore the audio settings to the correct values when the Unsupported audio mode
screen displays:
1. On the Unsupported audio mode screen, click the Adjust audio settings button.
Loading ...
Loading ...
Loading ...