Loading ...
Loading ...
Loading ...
6 Using the appliance
– An acoustic signal is emitted.
– Any running operating mode or application is ended; if switched on,
the timer, cooking space illumination, heatable appliance drawer or
plate warmer will remain active.
– The following appears in the display: « Residual heat».
– If the food probe is inserted, the food probe temperature
is displayed. *
* * applies only to appliances which were produced after February 2016 or
have received a software update.
▸ Press the touch button.
– All touch buttons go out.
– All functions are ended and switched off.
The appliance is switched off if none of the touch buttons are illumin-
ated any more and the display is dark.
The cooling fan can continue to run.
6.12 Emptying the water tank
Scalding hazard!
The water in the tank may be hot. If «Please do not remove the wa-
ter tank» appears in the display, the temperature of the residual wa-
ter is too high. Do not remove the water tank!
For safety reasons, the residual water is not pumped off until the
temperature has fallen below a certain level.
When the appliance is switched off, the residual water is pumped back into
the water tank.
The following appears in the display: «Water is being pumped off». When the
water has been pumped back:
▸ Press the touch button.
– The water tank is ejected.
▸ Remove, empty and dry the water tank.
▸ Put the water tank back.
Any operating mode can be started again.
48
Loading ...
Loading ...
Loading ...