Loading ...
Loading ...
Loading ...
43
Start
NOTICES
▯ Only use the descaler recommended by Thermador
for the descaling program. Other descalers may
damage the appliance.
Descaler order no. 10008170
▯ If you have used a steam-assisted operation
immediately before descaling, you must first switch the
appliance off so that the residual water is pumped out
of the evaporator system.
▯ Descaling solution: Do not allow the unmixed
descaling chemicals or mixed solution to come into
contact with the control panel or other surfaces on the
appliance as prolonged exposure may cause damage
to the surfaces. Immediately remove any descaler by
rinsing with tap water.
1.
Touch the ON l OFF touch button.
2.
Touch the MENU touch button.
3.
Swipe to the left or right to select "Descale ,".
4.
Touch continue.
The duration of the descaling program is displayed. It
cannot be changed.
5.
Touch continue again.
6.
Remove the water tank and fill it with descaling
solution.
7.
Mix 32 fluid oz. (950 ml) of water with 1/2 bottle
(approximately 200 ml) of descale solution.
8.
Once the water tank has been filled with descaling
solution, push it back in again fully.
9.
Follow the on-screen instructions.
The appliance will now be descaled. The remaining
time counts down on the display. As soon as the
descaling program has finished, an audible signal
sounds.
First Rinsing Cycle
1.
The display will prompt to open the appliance door.
Remove the water tank and rinse thoroughly. Fill the
tank with fresh water and reinsert.
2.
Close the appliance door.
The first rinse will begin automatically once the door is
closed. When complete an audible sound will be
heard and the display will prompt for the next step.
Second Rinsing Cycle
1.
The display will prompt to open the appliance door.
Remove the water tank and rinse throughly. Fill the
tank with fresh water and reinsert.
2.
Close the appliance door.
The second rinse will begin automatically once the
door is closed. When complete an audible sound will
be heard and the display will prompt for the next step.
Completing Descale
1.
Open the appliance door.
2.
Empty water tank. Rinse thoroughly. Dry and reinsert.
3.
Descaling is complete and the appliance is ready for
use again.
Loading ...
Loading ...
Loading ...