MEDS302WS User Manual

Loading ...

Touch the temperature field.

Swipe to the left or the right to select the required

temperature.

Touch the timer field +.

Swipe to the left or the right to select the required

duration.

Touch the START l STOP touch button.

The appliance starts the operation.

As soon as the cooking time has elapsed, an audible

signal sounds and the appliance ends the operation

automatically. Touch the TIMERS touch button to end the

audible signal.

Cancelling

Press the START l STOP button to cancel the appliance

operation.

Note: In a double oven, if both cavities are operating, it

is necessary to select the cavity in which you wish to

make changes.

Exit

Touch the ON l OFF touch button to switch off the

appliance.

Steam Assisted Cooking

When cooking with steam assistance, steam is

introduced into the oven cavity at various intervals and

with varying degrees of intensity. This gives you a better

cooking result.

Your food:

▯ Becomes crispy on the outside

▯ Develops a shiny surface

▯ Is juicy and tender on the inside

▯ Only undergoes a minimum reduction in volume

You set the desired heating mode and steam intensity

combination. Use the information in the table to select a

suitable heating mode and steam intensity. Select a

program from the available steam programs that meets

your cooking needs.

Steam Intensity

Different intensity levels are available when adding

steam:

▯ low

▯ medium

▯ high

Suitable Heating Modes

You can add steam for these heating modes:

▯ True Convection ‚

▯ Convection Bake ¶

▯ Bake ƒ

▯ Speed Convection ÷

▯ Convection Roast û

▯ Roast ü

Start

Refill water tank.

Note: Only switch on the Add Steam setting once the

oven cavity has completely cooled down (to room

temperature).

Touch the ON l OFF touch button.

Set the heating mode and temperature.

Touch the ADD STEAM touch button to switch on

steam assistance.

On the display, swipe to the left or right to select the

steam intensity.

Touch the 8 symbol to apply the setting.

Touch the START l STOP touch button.

The appliance starts the operation.

Note: If the water tank runs out of water during an

operation with steam assistance, a message appears on

the display prompting you to fill the water tank.

Cancelling Steam Addition

Touch the ADD STEAM touch button to cancel the

addition of steam early.

Touch the steam intensity in the bottom right corner of

the display.

Swipe to the left or right to select "Off".

Touch the 8 symbol to apply the setting.

Note: The operation continues without adding steam.