Loading ...
Loading ...
Loading ...
GETTING READY
23
1
e
The carriage moves to its initial position.
• If the number 1 needle bar is not already at the
embroidering position, the needle bar case moves
and the number 1 needle bar moves to the
embroidering position.
f
Set the main power switch to “O” to turn off the
machine.
■ Setting your machine for the first time
When you first turn on the machine, set the language and
time/date to your language and local time/date. Follow the
procedure below when the settings screen appears
automatically.
a
Touch and to set your local language and then
touch .
The carriage moves to its initial position.
b
The message screen, confirming if you want to set
time/date, appears. Touch .
1 Select [ON] to display time/date on the screen.
2 Touch or to select the date display format.
3 Set the year [YYYY], month [MM] and date [DD].
4 Select whether 24h or 12h setting to display.
5 Set the current time.
c
Touch to start using your machine.
The clock starts from 0 second of the time you set.
CAUTION
• Make sure to keep your hands and other items
away from the carriage, in order to prevent
any injuries.
Memo
• If the machine is turned off in the middle of
embroidering, the machine will automatically save
the design position when turned on again. At that
time, you will be asked if you wish to continue
embroidering or begin a new operation. (page 97)
4
3
5
2
1
Note
• The time/date you set may be cleared, if you don't
turn on the machine for an extended period of time.
• Time setting is also available by touching on
the bottom right of the LCD screen.
Loading ...
Loading ...
Loading ...