Loading ...
Loading ...
Loading ...
18
Setting up the machine
When setting up the machine, adjust the legs so that the
machine is steady.
a
Make sure that all packing tape affixed to the machine
is peeled off and that all packing material is removed.
b
Set up the machine while making sure that there is
sufficient space around it.
For details on the setup location, refer to page 17.
c
Adjust the legs so that the machine is steady.
Use the included wrench to loosen the lock nut on the
leg that you wish to adjust.
The foot can be turned.
d
Use the included wrench to turn the adjustable foot
nut on the foot.
Turning the nut in direction 1 lengthens the leg; turning
the nut in direction 2 shortens the leg.
• Adjust all four legs so that they securely contact the
desk or table, and the machine is level.
e
After adjusting the legs to the desired length, use the
included wrench to tighten the nuts.
f
Press down on each corner of the machine to check
that it is stable.
If it is still unstable, perform steps
c through e again
to adjust the legs.
Remove the fixing plates
a
Using the included Phillips screwdriver, remove each
of screws on the fixing plates.
1 Screws
2 Fixing plates
1 Lock nut
2 Adjustable foot nut
1 Adjustable foot nut
1 Lock nut
CAUTION
• Remove the fixing plates before turning on the
machine, otherwise the machine may
malfunction.
Memo
• After removing the fixing plates, be sure to keep
them to be used again. Before transporting the
machine, consult your authorized Brother dealer.
Loading ...
Loading ...
Loading ...