Loading ...
Loading ...
Loading ...
ADVANCED EMBROIDERY
129
3
l
Use to align the needle with the end of
embroidering for the previous pattern.
• Touch to check the needle drop point on the
LCD screen. Before displaying the camera image,
specify the appropriate image settings. (page 73)
- Better camera image results can be achieved with
the appropriate settings.
• Touch to zoom up the camera view.
m
Touch .
n
Touch , and then press the “Start/Stop”
button to begin embroidering the remaining character
patterns.
■ Embroidering a pattern aligned with a mark on
the fabric
By specifying the beginning of stitching and the end of
stitching, the exact position of the pattern can be checked.
a
Touch in the embroidering settings screen.
b
Select .
c
Set the beginning of stitching in the lower-left corner.
The frame moves so that the needle drop point aligns
with the beginning of stitching.
d
With a fabric marker, mark this point on the fabric.
e
Set the beginning of stitching in the lower-right corner.
The frame moves so that the needle drop point aligns
with the beginning of stitching.
f
With a fabric marker, mark this point on the fabric.
g
Remove the embroidery frame from the machine, and
then connect these two points to check the
embroidering position.
• If the baseline is misaligned or intersects another line,
reframe the fabric in the embroidery frame or adjust
the position of the pattern.
Note
• You can also follow the procedure of “Finding the
embroidering position” on page 80, by directly
place the needle over the end of the previous
pattern.
Loading ...
Loading ...
Loading ...