Loading ...
Loading ...
Loading ...
Symptom Possible cause Possible solution
Charging timer cannot be
performed.
The charge cable is not connected. Connect the charge cable.
The time on the clock is wrong. The charging timer function does not start charging based on the clock located on the upper
display. Confirm that the date and time shown on the charging timer screen are the same as
the GPS time and date. If the 12-volt battery is discharged or if the Li-ion battery is
disconnected, the time setting must be updated. There must be a GPS signal to adjust the
timer setting clock.
The immediate charge switch has been
pushed.
Charging timer does not operate when immediate charge is selected.
Charging timer has not been set. Set the charging timer schedule. See
“Charging timer” earlier in this section.
Charging does not start because the char-
ging timer start time and end time are set and
the current time is before the set start time.
Confirm when the charging timer time is set to start charging. Change the charging timer
setting to the desired charge time or press the immediate charge button. See “Charging timer”
earlier in this section.
Charging does not start because only the
charging timer start time is set and the
current time is after the set start time.
Charging does not start because only the
charging timer end time is set and the current
time is after the set end time.
Charging does not start because the charge
amount has been set to 80% and the Li-ion
battery is already charged to more than 80%.
When the charge percentage in the charging timer is set to 80%, the Li-ion battery cannot be
charged more than 80%. Confirm the charge percentage set in the charging timer. Change
the charging percentage the desired charge setting.
Remote charge cannot be
performed.
The charge cable is not connected. Connect the charge cable beforehand.
Communication with the vehicle cannot be
established.
Confirm that there is a cellular signal in your location. Remote charge can not be started unless
the web enabled smart phone can connect to the internet.
Confirm that there is a cellular signal at the vehicle location.
If the power switch is in the OFF position for more than 2 weeks, the remote charge function
can no longer be used until power switch is in ON position.
Charging CH-31
Loading ...
Loading ...
Loading ...