Loading ...
Loading ...
Loading ...
8-28 Maintenance and do-it-yourself
Checking tire pressure
1. Remove the valve stem cap from the
tire.
2. Press the pressure gauge securely onto
the valve stem. Do not press too hard or
force the valve stem sideways, other-
wise air will escape. If the hissing sound
of air escaping from the tire is heard
while checking the pressure, reposition
the gauge to eliminate this leakage.
3. Remove the gauge.
4. Read the tire pressure on the gauge
stem and compare it to the specifica-
tion shown on the Tire and Loading
Information label.
5. Add air to the tire as necessary. If too
much air is added, press the core of the
valve stem briefly with the tip of the
gauge stem to release pressure. Re-
check the pressure and add or release
air as necessary.
6. Install the valve stem cap.
7. Check the pressure of all of the tires.
SIZE
COLD TIRE
INFLATION
PRESSURE
FRONT
ORIGINAL
TIRE
P205/55R16
89H
250 kPa,
36 PSI
REAR
ORIGINAL
TIRE
P205/55R16
89H
250 kPa,
36 PSI
Example
TIRE LABELING
Federal law requires tire manufacturers to
place standardized information on the side-
wall of all tires. This information identifies
and describes the fundamental character-
istics of the tire and also provides the tire
identification number (TIN) for safety stan-
dard certification. The TIN can be used to
identify the tire in case of a recall.
Loading ...
Loading ...
Loading ...