Loading ...
Loading ...
Loading ...
REAR-FACING CHILD RESTRAINT
INSTALLATION USING THE SEAT
BELTS
WARNING
The three-point seat belt with Auto-
matic Locking Retractor (ALR) must be
used when installing a child restraint.
Failure to use the ALR mode will result
in the child restraint not being properly
secured. The restraint could tip over or
be loose and cause injury to a child in a
sudden stop or collision.
Refer to all Warnings and Cautions in “Child
safety” and “Child restraints” earlier in this
section before installing a child restraint.
Follow these steps to install a rear-facing child
restraint using the vehicle seat belt in the rear
seat:
Rear facing - step 1
1. Child restraints for infants must be
used in the rear-facing direction and
therefore must not be used in the front
seat.
Position the child restraint on the seat.
Always follow the restraint manufacturer’s
instructions.
Safety—Seats, seat belts and supplemental restraint system 1-25
Loading ...
Loading ...
Loading ...