Loading ...
Loading ...
Loading ...
CH-20 Charging
6. Touch [Yes] if the settings shown on the
screen are correct.
7. The [Timer 1] indicator illuminates after the
charging timer is set. Use the same proce-
dure to set the Timer 2 setting.
8. Place the power switch in the OFF position,
and then connect the charge connector to
the vehicle.
NOTE:
. Always place the power switch in the
OFF position after setting the charging
timers. When the power switch is in the
ON position, the Li-ion battery will not
start charging.
. The Li-ion battery may not be charged
to the expected level (80% or 100%) if
the charging timer start time and end
time are set so there is not enough
time to charge the Li-ion battery.
. When either the charge start time or
charge end time is set, the charging
timer function is activated.
. When only the charging timer end time
is set, the system automatically deter-
mines when to begin charging based
on the Li-ion battery charge level. The
Li-ion battery may not be charged to
the expected level (80% or 100%) in the
following conditions:
— The Li-ion battery is charged in cold
weather.
— The charge connector is connected
to the vehicle too close to the
scheduled charging end time.
. When only the charging timer end time
is set, the system automatically stops
charging when the Li-ion battery
charges to the selected level (80% or
100%). Charging may stop before the
scheduled end time.
. Touch [Timer 1] or [Timer 2] to turn off
the charging timer function. Touch [Yes]
if the settings shown on the screen are
correct. After this operation has been
performed, the indicator disappears
and the charging timer function is
turned off. The start and stop time
settings are not deleted, even if the
charging timer function is turned off.
Loading ...
Loading ...
Loading ...